Logitech® Wireless Speaker
8 English
If you quickly press the power button, your speaker will turn o but will continue to charge
its battery. If you hold the power button down for 10 seconds, your speaker will turn o
and go into a power-conservation mode, which will stop its battery from charging.
Note: If your speaker is charging in the “o” state, it will automatically turn completely o after
its battery is fully charged.
Wireless connection indicators
Solid green Connection made between iPad and speaker
Flashing green Seeking a connection between iPad and speaker.
Green light will flash for 5 minutes before going out.
No light iPad or speaker is out of wireless range for more than
5 minutes or speaker is powered o
Note: Wireless connection indicators disabled when using 3.5 auxiliary input.
Help with Setup
Something not sound right? No sound at all?
• Move the speaker closer to your iPad.
• Adjust the volume to an audible setting in your audio source and speaker.
• If another audio device was plugged directly into the speaker, make sure the 3.5 mm
cable is unplugged.
• Quit your music application and then restart it.
Visit www.logitech.com for more troubleshooting tips.
To Next Page
Loading...
Need help?
General