Lumens DC-F80 User Manual

English- 8
2.
Kensington safety
lock
Lock hole of safety lock
3.
Reset button
Press the button for initialization to reset to
original factory settings
4.
DIP Switch Setting
Adjust the resolution setting. The default is
1920*1080/30 fps
To switch the setting, please refer to Chapter 8
DIP Switch Setting
5.
Mode Switch Button
Switch Modes: HDMI/USB
6.
HDMI output port
Connect to HDMI output signal source
7.
USB Type-B port
The USB Type-B port is for connecting to the
USB port of the computer which provides USB
signal images and power
3.5 Description of LED indicator
Name
Indicator Status
Startup in progress,
initialization
Flickering blue light
In use
Blue Light
In standby mode
No indicator
A startup failure or error has
occurred
Flickering red light
Force to power off
Flickering blue light; no light after powering off

Lumens DC-F80 Specifications

General

Brand	Lumens
Model	DC-F80
Category	Document Camera
Language	English