EasyManuals Logo
Home>Lumens>Document Camera>PS752

Lumens PS752 User Manual

Lumens PS752
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
English - 32
3. Press [ENTER] to activate image comparison.
4. Press [], [], [], or [] to move the live image.
5. Press [MENU] to exit.
7.22 I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to improve
the image quality.
2. If there is special noise when VGA OUT is connected, please set DLP
option to improve the image quality.
2.1. Press [MENU] on the remote control or control panel to activate the
setting menu.
2.2. Press [], [], [], or [] to select [Setting].
2.3. Press [ENTER] to activate.
2.4. Press [] or [] to select [Control].
2.5. Press [] to [Projector Type].
2.6. Press [] or [] to select [LCD/DLP].
2.7. Press [MENU] to exit.
7.23 I would like to lock/unlock keys
Press and hold [ENTER + LAMP] on the control panel for 2 seconds to lock
keys. To unlock keys, repeat the above procedure.
<Remark> This function applies to the keys of the control panel only.
The remote control can still be used. If you use the remote control to
turn off the power, the keys will be unlocked automatically after
reboot.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lumens PS752 and is the answer not in the manual?

Lumens PS752 Specifications

General IconGeneral
BrandLumens
ModelPS752
CategoryDocument Camera
LanguageEnglish

Related product manuals