3rd Level
Adjustment Values
After it is activated, the Pan command
will be reverse
After it is activated, the Tilt command
will be reverse
5/ 25/ 50/ 80/ 120 deg/sec
Set the rotation speed of the cradle
head when Preset is executed
After it is activated, the Pan/Tilt moving
speed will vary from the zoom position
Off/ Mirror/ Flip/ Mirror+Flip
Set the mode at which the image is
turned
For AF triggering speed, the higher the
sensitivity is, the faster AF is triggered
AF frame setting, when Center was set
as AF frame, focusing will be on the
center of the screen. When Full Frame
was set as AF frame, focusing will be
calculated based on the full screen
Enable/Disable the dynamic host
configuration
Configurable when DHCP is set to Off
When the audio is not synchronized
with the video, enable this function to
set the audio delay time
Set the encode type and sample rate
Turn on/off the prompt information on
the display
Turn on/off the infrared reception
When it is Off, the remote control will
not be able to control the camera. At
this moment, turn off and then turn on
the power to restore control of the
remote control.