English-3
Chapter 2 Product Overview
2.1 I/O functions Introduction
Power/Standby LED indicator
Displaying the status of the camera, please refer to 2.2
Description of LED indicator
The USB port is for connecting to the USB port of the
computer and providing USB signal images
HDMI output (Audio output supported)
3G-SDI output (Audio output supported)
Network cable port, supporting PoE (IEEE802.3at) power
supply
RS-232 input port, at most 7 cameras can be connected in
a serial connection
RS-232 output port, at most 7 cameras can be connected
in a serial connection
DC supply connecting port
2.2 Description of LED indicator
Tracking /
Auto Framing mode