LF1050-INS-LAB-RevH18 8
5 ASSEMBLY INSTRUCTIONS
WARNING: The lift is heavy. To avoid personal injury, DO NOT attempt to assemble the lift
without assistance.
1. Engage the lift brakes, as shown above.
2. Remove the bolts from the bottom of the mast and base.
3. Pull the mast, boom, and spreader bar to an upright position, as shown above.
4. Reinstall the bolts in the holes at bottom of mast. Tighten the nuts.
5. Attach the control box hanging bracket to the mast, as shown above. Tighten the nuts.
To Next Page
Loading...
Need help?
General
