LF1600-INS-LAB-RevE15 • LF1600 Stand Assist 10
6 OPERATION
Info: Patients who desire additional security may wish to use the optional
DSLSA9 Sit-to-Stand Buttock Strap, available through your GF authorized
distributor.
The split seat units can be rotated upward to allow for patient loading then, once the
patient is in an upward standing position, lowered to form a complete two-sided seat.
WARNING: Ensure that both seat units are fully lowered and form a
complete seat before having the patient sit down on the Stand Assist.
WARNING: Do not leave a patient unattended during any part of the
transport.
1. Raise the two split seat units so
that they are parallel to the side
of the Stand Assist, as shown at
right.
2. Have the patient positioned at the edge of the surface
to be transferred from. Move the Stand Assist in front
of the patient. Position the patient so that her feet are
rmly on the platform and her knees and shins are in
contact with the two cupped kneepads, as shown at
right.
3. Lock the casters by stepping on the caster clip and
pushing down, as shown at right.
4. Have the patient grasp the cross bar closest to her and,
using her own strength, pull herself up into a standing
position securely on the base platform, as shown at
right.
To Next Page
Loading...
Need help?
General
