4-4 Surface Speed Measurement
1)Select ( default ) the function to surface speed " m/min "
" ft/min " or " in/min " refer chapter 4-1, page 5.
2)Press the " Power Button " ( 3-2, Fig. 1 ) and simply
attaching the " Surface Speed Wheel " ( 3-5, Fig. 1 ) to
the detector. Release the " Power Button " when the
reading stabilizes ( approx. 2 sec. ).
5. OPERATION PROCEDURE FOR
MEMORY RECALL
1)The readout of " last value ", " max. value " & " min.
value " can be obtained immediately & memorized
into the circuit automatically after turning off the
"Measuring Button".
2)When have finished the measuring procedures ( after
release the measuring button ), the memorized values
can be displayed on the LCD display whenever :
a.First push the " Memory Button " ( 3-4, Fig. 1 ) -
To display the last value ( " LA " and " the last value "
will be displayed alternately ).
b.Second, push the " Memory Button " again -
To display the maximum value ( " UP " and " the
max. value " will be displayed alternately).
c. Third, push the " Memory Button " again -
To display the minimum value ( " dn " and " the min.
value " will be displayed alternately ).
7
To Next Page
Loading...
Need help?
General
