Magic Chef MCD993B User Manual

9
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “ :0” and a tone will sound. If the AC power
ever turns off, the display shows “ :0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the TIME SET pads in sequence.
4. Touch the CLOCK pad.
The display stops blinking, and the colon starts blinking. If you selected 12
hour clock system, this digital clock allows you to set from 1:00 to 12:59. If
you selected 24 hour clock system, this digital clock allows you to set from
0:00 to 23:59.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK pad and re-enter the time.
NOTE : This oven has multiple clock systems.
If you want 12 hour clock system, omit this step.
+30 sec
+30 sec allows you to reheat for 30 seconds at full power by simply touching the Start/+30sec. pad.
By repeatedly touching the Start/+30sec. pad, you can also extend reheating time to 5 minutes by 30
second increments.
1. Touch the Start/+30sec. pad.
When you touch the +30 sec pad, ":30" is displayed.
After 1.5 seconds, the oven starts reheating.
HDUS_MCD993W,MCD993B,MCD993R_KOR9GRBW~(영).indd 9 2018-01-05 오후 1:24:22

Magic Chef MCD993B Specifications

General

Clock type	Electronic
Door hinge	Left
Timer type	Digital
Control type	Buttons
Product type	Solo microwave
Product color	Black
Door open type	Pull-out
Microwave power	900 W
Built-in display	Yes
Appliance placement	Countertop
Inverter technology	-
Number of power levels	10
Connected load	- W

Weight and Dimensions

Depth	356 mm
Width	457 mm
Height	279 mm
Weight	10886 g