Mahindra 4035 User Manual

35 Series-HST, Model - 3535, 4035, 4535 & 5035
36
Switches
Note : The Starting circuit is interconnected
with the Forward / Reverse system. Thus the
Engine will not start unless the Forward /
Reverse pedals are in neutral.
Switches
Combination Switch:
It is located in LH side of steering column on dashboard.
It consists of:
1. Horn (in centre)
2. Light Switch
3. Turn Signal Switch
Horn
Pressing the horn switch will blow the horn.
Light Switch
It is a 4 positions rotary switch. It operates in clockwise
direction and positions are as follows:
1. Off
2. Illuminate Parking Lamps
3. Illuminate low beam of head lamps & Parking Lamps
4. Illuminate high beam of head lamps & Parking Lamps
Turn Signal Switch
This is 3 positions rotary switch. The vertical position of knob
operates in both directions and the positions are as follows:
1. Vertical - OFF
2. Left - Operates LH Turn signal Lamp
3. Right - Operates RH Turn Signal Lamp
Starter Key Switch
It is a key operated 3 position rotary switch. It is located on
RH side of steering column on dashboard. It operates in
clockwise direction and positions are as follows:
1. Off
2. It gives readiness to electrical circuit for operation of
plow lamp switch, combination switch, instrument
cluster.
3. Activates the starting circuit for engine.
Work Lamp Switch
It is a 2 positions rotary switch located in LH side of steering
column on dashboard. It operates in clockwise direction
and positions are as follows:
1. Off
2. Illuminates the plow lamp

Mahindra 4035 Specifications

General

Brand	Mahindra
Model	4035
Category	Tractor
Language	English