7 Maintenance
7.1 Maintenance plan
7.2 Maintenance work
7.2.1 Emptying the dirt tank
7.2.2 Replacing the filter bag
After work As required
7.2.1 Emptying the dirt tank
•
7.2.2 Replacing the filter bag •
7.2.3 Replacing the filter element
•
7.2.4 Check suction hose and
accessories for clogging,
•
clean if necessary
Only after picking up harm-
less dust.
Empty the dirt tank when vacu-
uming without a filter bag.
1. Remove the upper section
of the cleaner from the dirt
tank.
2. Hold the dirt tank at the grip
underneath the tank and tip
out the dirt.
3. Dispose of the dirt in accord-
ance with legal regulations.
4. Clean the rim of the tank be-
fore fitting the upper section
of cleaner.
Before reinserting the suction
hose:
5. Clean the inlet fitting and
hose collar.
1. Remove the upper section of
cleaner from the dirt tank.
2. Carefully remove the filter
bag connection from the
inlet fitting.
3. Close the filter bag connec-
tion with the slide.
4. Dispose of the filter bag in
accordance with legal regu-
lations.
5. Place a new filter bag into
the clean tank as described
in the instructions (printed
on the filter bag).
IMPORTANT!
Press the filter bag connection
firmly on to the inlet fitting.
During the following work,
ensure that dust is not unnec-
essarily spread around.
Wear a P2 breathing mask.
To Next Page
Loading...
Need help?
General
