2 Description
2.1 Purpose
When used properly, the indus-
trial vacuum cleaners described
in these instructions are suita-
ble for sucking up dry, non-flam-
mable dusts and liquids.
2.2 Operating elements
See fold-out page at front of
these operating instructions.
1 Dirt tank
2 Retaining clamp
3 Appliance switch with suc-
tion power control
4 Handle with cable hook
5 Operating knob for filter
cleaning
6 Appliance socket
7 Inlet fitting
8 Grip to empty tank
9 Mounting for accessories
3 Before starting
3.1 Assembling the
vacuum cleaner
1. The mains plug should not
yet be inserted into a socket.
2. Open the retaining clamps
(1) and remove upper sec-
tion of the cleaner.
3. Take the accessories out of
the dirt tank and the packag-
ing.
4. Place a filter bag into the
tank as described in the
instructions (printed on the
filter bag).
IMPORTANT!
Press the filter bag con-
nection firmly on to the inlet
fitting.
5. Fit the upper section of the
cleaner (do not damage
the filter bag) and close the
retaining clamps.
NOTE!
Ensure that the retaining
clamps fit properly.
1
To Next Page
Loading...
Need help?
General
