Makita 6922NB User Manual

7
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Open the protector. Use a screwdriver to remove the
brush holder caps. Take out the worn carbon brushes,
insert the new ones and secure the brush holder caps.
1
2
3
004995
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Sleeve
Outer sleeve
Inner sleeve
Outer sleeve
Inner sleeve
Outer sleeve
Inner sleeve
Outer sleeve
Inner sleeve
Outer sleeve
Inner sleeve
Outer sleeve
Inner sleeve
O
uter sleeve
Inner sleeve
Bolt size
M16
M16
M20
M20
M22
M22
M22
M22
5/8"
5/8"
3/4"
3/4"
3/4"
3/4"
Lengh (mm)
35
36
37
38
39
85
85
35
36
37
38
83
84
39
006668
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
1. Screwdriver
2. Brush holder cap
3. Protector

Makita 6922NB Specifications

General

Brand	Makita
Model	6922NB
Category	Power Tool
Language	English