8
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before installing or
removing the wheel.
Fit the wheel and outer flange onto the spindle and
temporarily secure with the screw.
To tighten the screw, press the shaft lock firmly so that
the spindle cannot revolve, then use the hex wrench to
securely tighten the screw clockwise.
1
2
3
001092
To remove the wheel, follow the installation procedure in
reverse.
Hex wrench storage
1
001118
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
OPERATION
Sharpening with depressed center wheel
001132
WARNING:
• It should never be necessary to force the tool.
Forcing and excessive pressure could cause
dangerous wheel breakage.
• ALWAYS replace wheel if tool is dropped while
grinding.
• NEVER bang or hit grinding disc or wheel onto
work.
Hold the tool firmly. Turn the tool on and then apply the
wheel to the workpiece so that the wheel and blade
angle are parallel. Move the wheel constantly in the
direction shown in the figure, so that grinding action will
be even.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before attempting to
perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Hex wrench 4
• Various type of Makita genuine batteries and
chargers
1. Hex wrench
1. Hex wrench
2. Screw
3. Shaft lock
To Next Page
Loading...
Need help?
General
