Makita 9553B User Manual

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END202-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
.....................Wear safety glasses.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Model 9553B 9555B
Wheel diameter 100mm 125mm
Spindle thread M10 M14
No load speed (min
-1
)
11,000 10,000
Overall length 258 mm 258 mm
Net weight 1.4 kg 1.4 kg
Safety class
/II

Makita 9553B Specifications

General

Power Input	710W
Wheel Diameter	100 mm (4")
No Load Speed	11, 000 RPM
Voltage	120 V
Spindle Thread	M10 x 1.5
Cable Length	2.5 m (8.2 ft)
Arbor Size	16mm
Amperage	6.0 A
Net Weight	1.8 kg (4.0 lbs)