Makita 9553B User Manual

5
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Shaft lock
CAUTION:
• Never actuate the shaft lock when the spindle is moving. The tool may be
damaged.
Press the shaft lock to prevent spindle rotation when installing or removing
accessories.
Switch action
CAUTION:
• Before plugging in the tool, always check to see that the tool is switched
off.
To start the tool, move the switch lever to the I (ON) position. To stop the tool,
move the switch lever to the O (OFF) position.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing side grip (handle) (accessory)
CAUTION:
• Always be sure that the side grip is installed securely before operation.
Screw the side grip securely on the position of the tool as shown in the figure.
1. Shaft lock
1
006650
1. Switch lever
1
I/ON
O/OFF
006651
006652

Makita 9553B Specifications

General

Power Input	710W
Wheel Diameter	100 mm (4")
No Load Speed	11, 000 RPM
Voltage	120 V
Spindle Thread	M10 x 1.5
Cable Length	2.5 m (8.2 ft)
Arbor Size	16mm
Amperage	6.0 A
Net Weight	1.8 kg (4.0 lbs)