Adjusting
coolant
flow
Put water in the coolant reservoir.
Turn the knob
so
that the marking
is
posi-
tioned vertically to make the coolant flow.
Turn the marking to the horizontal posi-
tion to stop the coolant flow.
NOTE
:
Adjust the coolant flow adequately.
If
the
debris from the grinding wheel and the
blade
is
washed away by the coolant, the
coolant flow
is
excessive.
Draining
used coolant
The used coolant drains out through the
drain hose (vinyl tube) provided. Have
a
pan or drain system ready to catch
it.
r
10
To Next Page
Loading...
Need help?
General
