Screw in clockwise the forward adjust
screw on the right until the right upper
edge of the blade comes into contact with
the grinding wheel. Then fully tighten the
fastening screw on the far right.
Slide the holder to the right across
sharpening platform guide. Screw in
left-hand forward adjust screw until
left
upper edge of the blade contacts
grinding wheel. Now use
all
four fasten-
ing screws to secure the blade on the
horizontal.
the
the
the
the
Installing coolant
reservoir
(Tank)
Insert the reservoir
legs
into the grooves
provided for them on the sharpener frame.
9
To Next Page
Loading...
Need help?
General
