Makita BO6030 User Manual

11
• Never force the tool. Excessive pressure may decrease
the polishing efficiency and cause motor overload,
resulting in tool malfunction.
Applying wax
Use an optional sponge pad. Apply wax to the sponge pad or
work surface. Run the tool to smooth out wax.
NOTE:
• First, wax a non critical portion of the work surface to
make sure that the tool will not scratch the surface or
result in uneven waxing.
Removing wax
Use an optional felt pad. Run the tool to remove wax.
Polishing
Use an optional wool pad. Run the tool and apply the wool
pad gently to the work surface.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs, car-
bon brush inspection and replacement, any other mainte-
nance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita
replacement parts.
1. Sponge pad
1
003747
1. Felt pad
1
003748
1. Wool pad
1
003749

Makita BO6030 Specifications

General

Power	310 W
Vibration emission	4 m/s²
Eccentricity	1.6 mm
Idle speed (max)	10000 RPM
Idle speed (min)	4000 RPM
Oscillating orbit diameter	3.2 mm
Power source	AC

Weight and Dimensions

Depth	308 mm
Width	149.2 mm
Height	181 mm
Weight	2300 g
Sanding disc diameter	150 mm