Makita CP100DZ User Manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: CP100D
No load speed 300 min
-1
Overall length 291 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 0.72 - 0.88 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
withoutnotice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombination,accordingtoEPTA-Procedure01/2014,areshowninthetable.
Intended use
Thetoolisintendedforcuttingexible,softmaterialsup
to6mminthickness,suchascarpet,cardboard,and
similarmaterials.Thetoolisalsointendedforcutting
CD,DVD,andBlu-rayDisc.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN62841:
Soundpressurelevel(L
pA
):70dB(A)orless
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN62841:
Workmode:Cuttingcardboard
Vibrationemission(a
h
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
beenmeasuredinaccordancewiththestandardtest
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclaredvibrationemissionvalue
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING:Thevibrationemissionduringactual
useofthepowertoolcandifferfromthedeclared
emissionvaluedependingonthewaysinwhichthe
toolisused.
WARNING:Besuretoidentifysafetymeasures
to protect the operator that are based on an estima-
tionofexposureintheactualconditionsofuse(taking
accountofallpartsoftheoperatingcyclesuchas
thetimeswhenthetoolisswitchedoffandwhenitis
runningidleinadditiontothetriggertime).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
tothisinstructionmanual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool.Failuretofollowallinstructionslistedbelow
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless)powertool.
Cordless multi cutter safety warnings
1. Hold the power tool by insulated gripping surfaces,
when performing an operation where the blade may
contact hidden wiring.Bladecontactinga"live"wire
maymakeexposedmetalpartsofthepowertool"live"
andcouldgivetheoperatoranelectricshock.
2. Hold the tool rmly.
3. Do not touch the blade or bring the tool near
the hand or face.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace strict
adherence to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.

Makita CP100DZ Specifications

General

Brand	Makita
Model	CP100DZ
Category	Cutter
Language	English