Makita DBO180 User Manual

10 ENGLISH
1. Applying wax
1
►1. Sponge pad
Useanoptionalspongepad.Applywaxtothe
sponge pad or work surface. Run the tool at low
speed to smooth out wax.
NOTE:
• First, wax a not conspicuous portion of the
work surface to make sure that the tool will not
scratch the surface or result in uneven waxing.
• The tool starts with high speed mode. Be careful
whenyoustartthetool.Thewaxmaybespat-
tered.Itisrecommendedthatyouspreadwax
with the tool stopped before starting up the tool.
Changethespeedmodetolowimmediately
afteryoustartthetool.
• Alwaysrunthetoolatlowspeed.Runningitat
highspeedmaycausethewaxtospatter.
2. Removing wax
1
►1. Felt pad
Use an optional felt pad. Run the tool at low speed
to remove wax.
3. Polishing
1
►1. Wool pad
Use an optional wool pad. Run the tool at low speed
andapplythewoolpadgentlytotheworksurface.
MAINTENANCE
CAUTION:
• Alwaysbesurethatthetoolisswitchedoffand
thebatterycartridgeisremovedbeforeattempt-
ing to perform inspection or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or the
like.Discoloration,deformationorcracksmayresult.
To maintain product SAFETY and RELIABILITY, repairs, carbon
brushinspectionandreplacement,anyothermaintenanceor
adjustmentshouldbeperformedbyMakitaAuthorizedService
Centers,alwaysusingMakitareplacementparts.
OPTIONAL ACCESSORIES
CAUTION:
•
These accessories or attachments are recommended
forusewithyourMakitatoolspeciedinthismanual.
Theuseofanyotheraccessoriesorattachments
mightpresentariskofinjurytopersons.Onlyuse
accessoryorattachmentforitsstatedpurpose.
Ifyouneedanyassistanceformoredetailsregarding
theseaccessories,askyourlocalMakitaServiceCenter.
• Hook-and-looptypeabrasivediscs(withpre-
punched holes)
• Hook-and-looptypespongepad
• Hook-and-looptypefeltpad
• Hook-and-looptypewoolpad
• Makitagenuinebatteryandcharger
• Dust box
• Paperlterbag
• Dust bag
NOTE:
• Someitemsinthelistmaybeincludedinthe
toolpackageasstandardaccessories.They
maydifferfromcountrytocountry.

Makita DBO180 Specifications

General

Depth	175 mm
Width	123 mm
Height	153 mm
Weight	1700 g
Operating time	- min
Battery voltage	18 V
Dust extraction port	Yes
Power source	Battery
Eccentricity	1.4 mm
Idle speed (max)	11000 RPM
Idle speed (min)	7000 RPM
Oscillating orbit diameter	2.8 mm
Uncertainty K	1.5 m/s²
Dust container type	Dust bag

Weight and Dimensions

Sanding disc diameter	125 mm