Makita DHP481 User Manual

11
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Drill bits
• Hammer drill bits
• Screw bits
• Blow-out bulb
• Makita genuine battery and charger
• Grip assembly
• Depth rod
• Hook
• Rubber pad assembly
• Wool bonnet
• Foam polishing pad
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.

Makita DHP481 Specifications

General

Max Torque (Hard)	115 Nm
Max Torque (Soft)	60 Nm
Voltage	18V
No Load Speed (High)	0-2100 RPM
No Load Speed (Low)	0-550 RPM
Chuck Capacity	1.5 - 13 mm
Max. drilling diameter in masonry	16 mm
Max. drilling diameter in steel	13 mm
Max. drilling diameter in wood	76 mm
Number of Gears	2
Battery Type	Li-ion
Blows per Minute (High)	0 - 31500 ipm
Blows per Minute (Low)	0-8, 250 BPM
Weight	2.7 kg (with battery)