Need help?Do you have a question about the Makita DHP482 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| No Load Speed (High) | 0-1, 900 RPM |
| No Load Speed (Low) | 0-600 RPM |
| Chuck Capacity | 13mm |
| Max. Drilling Capacity in Steel | 13mm |
| Max. Drilling Capacity in Wood | 38mm |
| Max. Drilling Capacity in Masonry | 13mm |
| Max Torque (Soft) | 36Nm |
| Battery Type | Li-ion |
| Length | 198mm |
| Blows per Minute (High) | 0-28, 500 BPM |
| Blows per Minute (Low) | 0 - 9, 000 IPM |
| Weight | 1.5 - 1.8 kg |
To Next Page
