Makita DHP482Z User Manual

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DHP482
Drilling capacities Concrete 13 mm
Steel 13 mm
Wood 38 mm
Fastening capacities Wood screw 10 mm x 90 mm
Machine screw M6
No load speed High (2) 0 - 1,900 min
-1
Low (1) 0 - 600 min
-1
Blows per minute High (2) 0 - 28,500 min
-1
Low (1) 0 - 9,000 min
-1
Overall length 198 mm
Rated voltage D.C. 18 V
Battery cartridge BL1815N, BL1820, BL1820B BL1830, BL1840, BL1850, BL1830B,
BL1840B, BL1850B, BL1860B
Net weight 1.5 kg 1.8 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Intended use
Thetoolisintendedforimpactdrillinginbrick,concrete
andstone.Itisalsosuitableforscrewdrivinganddrill-
ing without impact in wood, metal, ceramic and plastic.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
Sound pressure level (L
pA
):82dB(A)
Sound power level (L
WA
):93dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN60745:
Workmode:impactdrillingintoconcrete
Vibrationemission(a
h,ID
):6.0m/s
2
Uncertainty(K):1.5m/s
2
Workmode:drillingintometal
Vibrationemission(a
h,D
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
beenmeasuredinaccordancewiththestandardtest
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclaredvibrationemissionvalue
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING:Thevibrationemissionduringactual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
toprotecttheoperatorthatarebasedonanestima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
MakitadeclaresthatthefollowingMachine(s):
DesignationofMachine:CordlessHammerDriverDrill
ModelNo./Type:DHP482
ConformstothefollowingEuropeanDirectives:
2006/42/EC
Theyaremanufacturedinaccordancewiththefollowing
standardorstandardizeddocuments:EN60745
Thetechnicalleinaccordancewith2006/42/ECis
availablefrom:
Makita,Jan-BaptistVinkstraat2,3070,Belgium
30.3.2015
Yasushi Fukaya
Director
Makita,Jan-BaptistVinkstraat2,3070,Belgium

Makita DHP482Z Specifications

General

Soft grip	Yes
Chuck type	Keyless
Product design	Pistol grip drill
Number of gears	2
Torque settings	21
Sound power level	93 dB
Chuck capacity (max)	13 mm
Chuck capacity (min)	1.5 mm
Sound pressure level	82 dB
Idle speed (1st gear)	600 RPM
Idle speed (2nd gear)	1900 RPM
Impact rate (low speed)	9000 bpm
Sound level uncertainty	3 dB
Impact rate (high speed)	28500 bpm
Drilling diameter in wood (max)	38 mm
Vibration level (metal drilling)	2.5 m/s²
Maximum torque (hard applications)	62 N⋅m
Maximum torque (soft applications)	36 N⋅m
Vibration level (concrete drilling)	6 m/s²
Product color	Black, Blue
Uncertainty K	1.5 m/s²
Battery charger included	No
Power source	Battery
Battery voltage	18 V

Weight and Dimensions

Depth	198 mm
Width	79 mm
Height	238 mm
Weight	1800 g