Makita DMR108 User Manual

6
18. Battery compartment (covering main battery pack and
back up batteries)
19. Up
20. Left
21. Front
22. Right
23. Back; Battery cover closed
24. Back; Battery cover opened
25. Battery cartridge
26. Button
27. Indicator lamps
28. Check button
LCD display:
A. Radio alarm
B. Buzzer alarm
C. Stereo symbol
D. Low battery indicator
E. Clock
F. Frequency
G. RDS (Radio data system)
H. Sleep status
I. AM/PM for clock
Battery Installation
Note:
Keeping back up batteries inside the compartment
prevent stored data in preset memories from being lost.
Back up battery Installation
1. Pull out the battery compartment locker to release
battery compartment. There are main battery pack
compartment and back up battery compartment.
(Fig. 2)
2. Remove back up battery compartment cover and
insert 2 fresh UM-3 (AA sizes). Make sure the
batteries are with correct polarity as shown inside the
compartment. Replace the battery cover. (Fig. 3)
3. After back up batteries are inserted, insert the main
battery pack to power radio. The suitable battery
packs for this radio listed as the following table.

Makita DMR108 Specifications

General

Radio type	Worksite
Tuner type	-
AM band range	522 - 1.629 kHz
FM band range	87.5 - 108 MHz
Auto digital tuning	Yes
Supported radio bands	AM, FM
Number of built-in speakers	2
Apple docking compatibility	Not supported
USB 2.0 ports quantity	1
MP3 playback	No
Product color	Black, Blue
Protection features	Shock resistant, Water resistant
International Protection (IP) code	IP64
Power source	AC/Battery
RMS rated power	7 W
Power source type	AC, Battery

Weight and Dimensions

Depth	257 mm
Width	163 mm
Height	431 mm
Weight	4300 g