Makita DSC251ZK User Manual

2 ENGLISH
Read, understand and follow all safety instructions and operating
procedures. If you do not understand the instructions, or if condi-
tions are not correct for proper operation, DO NOT OPERATE THE
MACHINE. Consult your supervisor or other responsible person.
SPECIFICATIONS
Model: DSC251
Voltage D.C. 18 V
Weight 4.0 kg (8.82 lbs)
Dimensions (L x W x H) 471 mm x 137 mm x 139 mm / 18-17/32″ x 5-25/64″ x 5-15/32″ (excluding a handle)
Cutting Capacity of a rebar
(620 N/mm
2
/ 90,000 psi )
φ10 to φ25 mm (SD490)
3/8″ to 1″ (Grade 60)
No load speed 2200 min
-1
External Diameter of Blade 110 mm / 4.3″
Battery cartridge BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SE / DC18SF / DC18SD
• Specications and design may be subject to change without prior notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
WARNING
Read and understand this instruction manual before
operating this machine. Failure to follow operating
instructions could result in death or serious injury.
WARNING LABELS RELATED TO
SAFETY
Flying debris and loud noise hazards. Wear ear and
eye protection.
Moving blade. Keep hands clear while machine is
operating. Turn power off before servicing.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Cd
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
SAVE THESE INSTRUCTIONS
Meaning of “caution” and “warning” indications
Caution: Indicates a potentially hazardous situation
which, if not avoided, may result in minor
or moderate injury. This is also used to
alert against unsafe practices associated
with events that could lead to personal
injury.
Warning: Indicates a potentially hazardous situation
which, if not avoided, will result in death or
serious injury.
*** Makita shall not be responsible for any inci-
dental damages or personal injuries result-
ing from negligence of Warnings and Safety
Instructions contained in the Instruction
Manual.
Intended use
The tool is intended for cutting rebar.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.

Makita DSC251ZK Specifications

General

Brand	Makita
Model	DSC251ZK
Category	Cutter
Language	English