6 ENGLISH
Vibration
The vibration total value (tri-axial
vector sum) determined
according to EN62841-2-2:
Work mode: impact tightening of
fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
h
) : 10.5
m/s
2
Uncertainty (K) : 1.5
m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used
for comparing one tool
with another.
NOTE: The declared vibration emission value may
also be used in
a preliminary assessment
of exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the
ways in which the
tool is used.
WARNING: Be sure to
identify safety measures to
protect the operator that are based on an estimation
of exposure in the
actual conditions of use
(taking account of all
parts of the
operating cycle such as
the times when the tool is switched off and
when it is running idle in addition
to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of
conformity is included as
Annex A to this instruction
manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result
in electric shock, fire
and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in
the warnings refers to
your mains-operated (corded)
power tool or battery-
operated (cordless) power tool.
Cordless impact wrench safety
warnings
1. Hold the power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring.
Fasteners contacting a "live"
wire may make exposed
metal parts of the
power tool "live" and
could give the operator an electric shock.
2. Wear ear protectors.
3. Check the impact socket carefully for wear,
cracks or damage before installation.
4. Hold the tool firmly.
5. Keep hands away from rotating parts.
6. Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
7. The proper fastening torque may differ
depending upon the kind or size of the bolt.
Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical
All manuals and user guides at all-guides.com
all-guides.com
To Next Page
Loading...
Need help?
General
