To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why my Makita Chainsaw does not start?
If your Makita Chainsaw doesn't start, it might be due to several reasons. First, ensure a charged battery cartridge is correctly installed. If the battery is low, recharge it or replace it if necessary. Also, check if the main power switch is turned off, as the chainsaw automatically shuts down after inactivity. Turn the main power switch on again to resolve this.
What to do if there is no oil on the chain of my Makita DUC254Z?
If you notice no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so refill it. Another possible reason is a dirty oil guide groove, which requires cleaning. You may also need to adjust the amount of oil delivery with the adjusting screw if the oil delivery is poor.
What to do if the saw chain does not run on my Makita DUC254Z Chainsaw?
If the saw chain of your Makita Chainsaw does not run, it is likely because the chain brake is activated. Release the chain brake to allow the chain to run.
General| Idle speed | - RPM |
|---|---|
| Motor type | Brushless |
| Chain speed | 24 m/s |
| Blade length | 482 mm |
| Product color | Blue |
| Oil tank capacity | 0.14 L |
| Power source | Battery |
| AC input voltage | 18 V |
Lists compatible battery cartridges and chargers for the tool.
Details compatible combinations of saw chains, guide bars, and sprockets.
Essential safety precautions applicable to all power tools.
Safety guidelines specific to operating cordless chain saws.
Step-by-step guide for inserting and removing the battery.
Explains the tool's response to excessive current draw.
Describes how the tool stops if it overheats.
Details the tool's behavior when the battery is low.
Steps for fitting or removing the saw chain and guide bar.
Techniques and safety for pruning trees with the chain saw.
Detailed guide on how to sharpen the saw chain.
Instructions on using files for chain sharpening.
