Makita DUC406ZB User Manual

24 ENGLISH
1. Clean the tool before storing. Remove any chips
and sawdust from the tool after removing the
sprocket cover.
2. After cleaning the tool, run it under no load to
lubricate the saw chain and guide bar.
3. Cover the guide bar with the guide bar cover.
4. Empty the oil tank.
Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features, the following maintenance
must be performed regularly. Warranty claims can be recognized only if this work is performed regularly and
properly. Failure to perform the prescribed maintenance work can lead to accidents! The user of the chain saw must
not perform maintenance work which is not described in the instruction manual. All such work must be carried out by
our authorized service center.
Check item / Operating time
Before
operation
Everyday
Every week
Every 3
month
Annually
Before
storage
Chain saw
Inspection.
-
-
-
-
-
Cleaning.
-
-
-
-
-
Check at
authorized
service
center.
-
-
-
-
Saw chain
Inspection.
-
-
-
-
-
Sharpening if
necessary.
-
-
-
-
-
Guide bar
Inspection.
-
-
-
-
Remove from
the chain saw.
-
-
-
-
-
Chain brake
Check the
function.
-
-
-
-
-
Have it
inspected
regularly at
authorized
service
center.
-
-
-
-
-
Chain
lubrication
Check the oil
feed rate.
-
-
-
-
-
Switch trigger
Inspection.
-
-
-
-
-
Lock-off lever
Inspection.
-
-
-
-
-
Oil tank cap
Check
tightness.
-
-
-
-
-
Chain catcher
Inspection.
-
-
-
-
-
Screws and
nuts
Inspection.
-
-
-
-
-
TROUBLESHOOTING
Before asking for repairs, conduct your own inspection first. If
you find a problem that is not explained in the
manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using
Makita replacement parts for repairs.

Makita DUC406ZB Specifications

General

Brand	Makita
Model	DUC406ZB
Category	Chainsaw
Language	English