Makita DUH606Z User Manual

16 ENGLISH
4. Settheangleofaleto35°,andgrindtheupper
bladefrom2directionswiththele.
1
2
Fig.33
►(1) File (2) 35°
CAUTION: Before grinding the shear blades,
make sure that the tool is switched o󰀨 and the
battery cartridge is removed from the tool.
5. Place the tool upside down, and then remove the
burrs from the shear blades with the dressing stone.
1
Fig.34
►1. Dressing stone
6. Settheangleoftheleto35°,andgrindthelower
bladefrom2directionswiththele.
7. Return the tool to normal position, and then
remove the burrs from the shear blades with the dress-
ing stone.
Grease lubrication
Interval of lubrication: Every 50 operating hours
1. Remove the bolt from the hole for lubrication.
1
Fig.35
►1. Bolt
2. Remove the cap from the grease vessel. Align the
outlet of the grease vessel with the hole on the cover,
and then turn the grease vessel to attach the outlet of
the grease vessel into the hole.
21
Fig.36
►1. Grease vessel 2. Hole
3. Apply the grease to the tool (Approximately 3 g as
a guide).
4. Remove the grease vessel.
5. Tighten the bolt.

Makita DUH606Z Specifications

General

Brand	Makita
Model	DUH606Z
Category	Trimmer
Language	English