Makita DUR184L User Manual

2 ENGLISH
SPECIFICATIONS
Model: DUR184L
Type of handle Loop handle
No load speed 5,000 / 6,000 min
-1
Overall length 1,534 - 1,634 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head (P/N
197297-1)
300 mm
Rated voltage D.C. 18 V
Net weight 3.3 kg 3.6 kg
Battery cartridge BL1815N, BL1820, BL1820B BL1830, BL1840, BL1840B,
BL1850, BL1850B, BL1860B
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Noise
- Soundpressurelevel
average
Soundpowerlevelaverage Applicable standard
L
PA
(dB(A)) L
WA
(dB(A)) Uncertainty K (dB(A))
Nylon cutting head 77 89 2.0 2000/14/EC
• Evenifthesoundpressurelevellistedaboveis80dB(A)orless,thelevelunderworkingmayexceed80dB
(A).Wearearprotection.
Vibration
- Left hand Right hand Applicable standard
a
h,W
(m/s
2
) Uncertainty K (m/s
2
) a
h,W
(m/s
2
) Uncertainty K (m/s
2
)
Nylon cutting head
2.5
1.5
2.5
1.5 EN50636-2-91
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:Thedeclaredvibrationemissionvaluemayalsobeusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of
exposureintheactualconditionsofuse(takingaccountofallpartsoftheoperatingcyclesuchasthetimeswhen
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger;beawareofthrownobjects.
The distance between the tool and
bystanders must be at least 15 m.
360°
Keep bystanders away.
15m(50FT)
Keep distance at least 15 m.
Wearahelmet,gogglesandearprotection.
Wearprotectivegloves.
Wearsturdybootswithnonslipsoles.
Steeltoedsafetybootsarerecommended.
Donotexposetomoisture.
Top permissible tool speed.

Makita DUR184L Specifications

General

Brand	Makita
Model	DUR184L
Category	Trimmer
Language	English