2 ENGLISH
SPECIFICATIONS
Model: DUR187U DUR187L DUR188U DUR188L
Type of handle Bike handle Loop handle Bike handle Loop handle
No load speed 4,000/5,000/6,000 min
-1
Overall length
(without cutting tool)
1,791 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 123932-5)
300 mm
Plastic blade (P/N 123954-5) 255 mm
Rated voltage D.C. 18 V
Net weight
(when using BL1830B)
with nylon cutting head 3.8 kg 3.6 kg 4.1 kg 3.9 kg
with plastic blade 3.9 kg 3.6 kg 4.1 kg 3.9 kg
Battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B, BL1860B
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Read instruction manual.
Danger;beawareofthrownobjects.
The distance between the tool and
bystanders must be at least 15 m.
Keep bystanders away.
15m(50FT)
Keep distance at least 15 m.
Wearahelmet,gogglesandearprotection.
Wearprotectivegloves.
Wearsturdybootswithnonslipsoles.
Steeltoedsafetybootsarerecommended.
Do not expose to moisture.
Top permissible tool speed.
Never use metal blade.
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
battery pack together with household
waste material! In observance of the
EuropeanDirectives,onWasteElectric
andElectronicEquipmentandBatteries
andAccumulatorsandWasteBatteriesand
Accumulators and their implementation
in accordance with national laws, electric
equipment and batteries and battery
pack(s) that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
SAFETY WARNINGS
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
1. Be familiar with the controls and proper use of
the equipment.
2. Cutting elements continue to rotate after the
motor is switched off.
3. Never allow children or people unfamiliar with
the instructions to use the machine.
4. Stop using the machine while people, espe-
cially children, or pets are nearby.
5. Only use the machine in daylight or good arti-
cial light.