11 ENGLISH
Press the check button on the battery cartridge to indi-
catetheremainingbatterycapacity.Theindicatorlamps
light up for a few seconds.
Indicator lamps Remaining
capacity
Lighted Off Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
Thebattery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Main power switch
Tapthemainpowerbuttontoturnonthetool.
Toturnoffthetool,pressandholdthemainpowerbut-
ton until the power lamp and speed indicator go off.
2
1
3
►1.Speedindicator2. Main power button 3. Power
lamp
NOTE:Thetoolwillautomaticallyturnedoffifitisleft
without any operations for a certain period of time.
Switch action
WARNING: For your safety, this tool is
equipped with lock-off lever which prevents the
tool from unintended starting. NEVER use the tool
if it runs when you simply pull the switch trigger
without pressing the lock-off lever. Return the
tool to our authorized service center for proper
repairs BEFORE further usage.
WARNING: NEVER tape down or defeat pur-
pose and function of lock-off lever.
CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released. Operating a tool
with a switch that does not actuate properly can lead
tolossofcontrolandseriouspersonalinjury.
CAUTION: Never put your nger on the main
power button and switch trigger when carrying
the tool.Thetoolmaystartunintentionallyandcause
injury.
NOTICE: Do not pull the switch trigger hard with-
out pressing the lock-off lever. This can cause
switch breakage.
Topreventtheswitchtriggerfrombeingaccidentally
pulled,alock-offleverisprovided.Tostartthetool,
depress the lock-off lever and pull the switch trigger.
Thetoolspeedincreasesbyincreasingpressureonthe
switch trigger. Release the switch trigger to stop.
DUR368A
1
2
►1. Lock-off lever 2.Switchtrigger