Makita DUR368A User Manual

13 ENGLISH
1
2
►1. Reverse button 2. Power lamp
NOTE: During the reverse rotation, the tool operates
only for a short period of time and then automatically
stops.
NOTE: Once the tool is stopped, the rotation returns
to regular direction when you start the tool again.
NOTE: If you tap the reverse button while the cutting
tool is still rotating, the tool comes to stop and to be
ready for reverse rotation.
Electric brake
Thistoolisequippedwithanelectricbrakeforthecut-
tingtool.Ifthetoolconsistentlyfailstoquicklystopthe
cutting tool after the switch trigger is released, have the
tool serviced at our service center.
CAUTION: This brake system is not a substi-
tute for the protector. Never use the tool without
the protector. An unguarded cutting tool may result
inseriouspersonalinjury.
Electronic function
Constant speed control
Thespeedcontrolfunctionprovidestheconstantrota-
tion speed regardless of load conditions.
Soft start feature
Softstartbecauseofsuppressedstartingshock.
ASSEMBLY
WARNING: Always be sure that the tool is
switched off and battery cartridge is removed
before carrying out any work on the tool.Failureto
switch off and remove the battery cartridge may result
inseriouspersonalinjuryfromaccidentalstart-up.
WARNING: Never start the tool unless it is
completely assembled. Operation of the tool in a
partially assembled state may result in serious per-
sonalinjuryfromaccidentalstart-up.
Installing the handle
For DUR368A
1. Insert the shaft of the handle into the grip. Align
the screw hole in the grip with the one in the shaft.
Tightenthescrewsecurely.
1
2
3
►1. Grip 2.Screw3.Shaft
NOTICE: Note the direction of the grip. The
screw holes will not be aligned if the grip is not
inserted in the correct direction.
2. Place handle between handle clamp and handle
holder.Adjustthehandletoananglethatprovidesa
comfortable working position and then secure with hex
socket head bolts.
2
1
3
►1. Hex socket head bolt 2. Handle clamp 3. Handle
holder

Makita DUR368A Specifications

General

Brand	Makita
Model	DUR368A
Category	Trimmer
Language	English