Makita DUR369LZ User Manual

15 ENGLISH
Attaching the barrier
For the loop handle model only (country specic)
If the barrier is included in your model, attach it to the
handle using the screw on the barrier.
1
2
►1. Barrier 2. Screw
CAUTION: After assembling the barrier, do
not remove it. The barrier works as a safety part
to prevent you from contacting the cutting blade
accidentally.
Hex wrench storage
CAUTION: Be careful not to leave the hex
wrench inserted in the tool head. It may cause
injuryand/ordamagetothetool.
When not in use, store the hex wrench as illustrated to
keep it from being lost.
1
►1. Hex wrench
For the loop handle model, the hex wrench can also be
stored on the handle as illustrated.
1
►1. Hex wrench
Correct combination of the cutting
tool and the protector
CAUTION: Always use the correct combi-
nation of cutting tool and the protector. A wrong
combination may not protect you from the cutting tool,
yingdebris,andstones.Itcanalsoa󰀨ectthebal-
anceofthetoolandresultinaninjury.
Cutting tool Protector
Cutter blade
(2-tooth, 3-tooth, 4-tooth
blades)
Nylon cutting head
Plastic blade
Installing the protector
WARNING: Never use the tool without the
guard or with the guard improperly installed.
Failuretodosocancauseseriouspersonalinjury.
NOTE: The type of the protector supplied as the stan-
dard accessory varies depending on the countries.

Makita DUR369LZ Specifications

General

Type	2-in-1 Brush cutter & String trimmer
Cordless	Yes
Head type	Blade & nylon line
Handle type	D-loop handle
Product color	Green
Rotational speed	7000 RPM
Cutting diameter (max)	430 mm
Power source	Battery
Battery voltage	18 V
Battery included	No

Weight and Dimensions

Length	1905 mm
Weight	5700 g