Pull out the hood cap (1
the scew (2) and remove the
hood (3)
4) (Choke position) to prevent
5) slightly in the direction of the
6
Cover the intake opening with a clean cloth to
6
5) will engage automatically if
Push down the switch (4) and press the throt
tle (7) all the way down one time in order to deactivate the
throttle
Put on the hood (3) When doing so make sure that the lower
pins () on sides of the hood engage properly (when
correctly the pins should not )
Tighten screw (2)
Return the hood cap (1
To Next Page
Loading...
Need help?
General
