Makita EK7650H User Manual

23
SPECIAL ACCESSORIES
Diamond cutting discs
MAKITA diamond cutting discs meet the highest demands
in working safety, ease of operation, and economical cutting
performance. They can be used for cutting all materials except
metal.
The high durability of the diamond grains ensures low wear and
thereby a very long service life with almost no change in disc
diameter over the lifetime of the disc. This gives consistent cutting
performance and thus high economy. The outstanding cutting
qualities of the discs make cutting easier.
The metal disc plates give highly concentric running for minimal
vibration during use.
The use of diamond cutting discs reduces cutting time signicantly.
This in turn leads to lower operating costs (fuel consumption, wear
on parts, repairs, and last but not least environmental damage).
Guide cart
The MAKITA guide cart makes it much easier to do straight cuts,
while simultaneously enabling almost untiring working. It can be
adjusted for the operator’s height, and can be operated with the
cutting attachment mounted in the middle or on the side.
A depth limiter can be added for still easier and more accurate
cutting. It makes it possible to maintain a precise predetermined cut
depth.
To keep down dust and for better cutting-disc cooling, MAKITA
offers several options for wetting the disc during operation.
Water tank (the component of cart)
The water tank is designed to be mounted on the guide cart.
Its high capacity makes it especially suitable for situations involving
frequent site changes. For lling or for fast changing to reserve
tanks, the tank can be simply lifted off the cart.
The water tank comes with all necessary connections and hoses.
Mounting to the cart and Power Cutter are very fast and simple.
Mains/pressure water system
The mains/pressure water system is designed to be mounted on
the Power Cutter. It can be used with or without the cart, but is
especially suitable for applications involving hand-held, stationary
cutting. The water line has a fast-release connection, and can be
fed either from a mains supply or from a pressure tank (7).
The water system comes with all necessary connections and lines.
It can be quickly and easily mounted on the Power Cutter.
Cart set•
This is useful for road bed cutting
Filter set•
Prelter (5 lters)
Air lter (1 lter)
Dust bag lter (1 lter)

Makita EK7650H Specifications

General

Brand	Makita
Model	EK7650H
Category	Cutter
Language	English