Name: Makita EN4950H
Brand: Makita
Rating: 4 (1 reviews)

To Next Page

To Previous Page

(1)

STOPPING

1) Release the throttle lever (2) fully, and when the engine speed has lowered, set

the I-O switch (1) to STOP the engine will now stop.

2) Be aware that the cutting head may not stop immediately and allow it to slow

down fully.

ADJUSTMENT OF LOW-SPEED ROTATION (IDLING)

When it is necessary to adjust the low-speed rotation (idling), perform it by the

carburetor adjusting screw (1).

CHECKUP OF LOW-SPEED ROTATION

- Set the low-speed rotation to 3,000 rpm (/min).

If it is necessary to change the rotation speed, regulate the adjusting screw (1)

with Phillips screwdriver.

- Turn the adjusting screw to the right, and the engine speed will increase. Turn the

adjusting screw to the left, and the engine speed will drop.

- The carburetor is generally adjusted before shipment. If it is necessary to readjust

it, please contact Authorized Service Center.

STOP

(1)

(2)

Other manuals for Makita EN4950H

Questions and Answers:

Need help?

Do you have a question about the Makita EN4950H and is the answer not in the manual?

General