7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: GA4030R GA4530R GA5030R
Applicable grinding wheel Max. wheel diameter 100 mm 115 mm 125 mm
Max. wheel thickness 6.4 mm 7.2 mm
Max. wheel diameter 105 mm 115 mm 125 mm
Max. wheel thickness 3.2 mm
Applicable wire wheel brush Max. wheel diameter 100 mm 115 mm 125 mm
Max. wheel thickness 20 mm
Spindle thread M10
Max. spindle length 18 mm 23 mm
0
11,000 min
-1
Overall length 266 mm
Net weight 1.7 - 2.9 kg 1.9 - 3.1 kg
/II
without notice.
EPTA-Procedure 01/2014, are shown in the table.
Symbols
meaning before use.
operations.
DOUBLE INSULATION
Due to the presence of hazardous compo-
nents in the equipment, used electrical and
impact on the environment and human
health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and its adaptation to national law,
used electrical and electronic equipment
delivered to a separate collection point
for municipal waste, operating in accor-
dance with the environmental protection
regulations.
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for grinding, sanding, wire brush-
ing, hole cutting and cutting of metal and stone materi-
als without the use of water.
Power supply
the same voltage as indicated on the nameplate, and
are double-insulated and can, therefore, also be used
from sockets without earth wire.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
