18 ENGLISH
- Application 180 mm model 230 mm model
14 Wire brushing Wire cup brush
15 Hole cutting Hole cutter
16 - Wheel guard (for cut-o wheel)
17 Cutting-o Abrasive cut-o wheel / Diamond wheel
18 Grinding / Cutting-o Dual purpose wheel -
19 - Inner ange 78 (Australia and New Zealand only) *3
20 - Outer ange 78 (Australia and New Zealand only) *3
21 - Side grip for dust collecting wheel guard *4
22 - Dust collecting wheel guard for cutting-o *4*5
23 Cutting-o Diamond wheel
24 - Dust collecting wheel guard for grinding *6
25 Grinding Cup-type diamond wheel *6
- - Lock nut wrench
- - Dust cover attachment
NOTE: *1 Do not use Super ange and Ezynut together.
NOTE: *2 Only for tools with M14 spindle thread.
NOTE: *3 Use Inner ange 78 and Outer ange 78 together. (Australia and New Zealand only)
NOTE: *4 Use the Side grip for dust collecting wheel guard and the Dust collecting wheel guard for cutting-o
together.
NOTE: *5 For more details, refer to each instruction manual of the guard.
NOTE: *6 Only for model GA7020S / GA9020S
For more details, refer to each instruction manual of the guard.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Accessories listed in "COMBINATION OF
APPLICATIONS AND ACCESSORIES"
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
dier from country to country.