Makita HP2010N User Manual

10
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs, car-
bon brush inspection and replacement, any other mainte-
nance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
• Drill bits
• Hammer drill bits
• Blow-out bulb
• Safety goggles
• Chuck key
• Steel carrying case

Makita HP2010N Specifications

General

Drilling	Yes
Chiseling	-
Chuck type	Key
Product color	Green
Number of gears	2
Impact rate	46000 bpm
Rated speed (max)	2300 RPM
Rated speed (min)	0 RPM
Drilling diameter in wood (max)	25.4 mm
Drilling diameter in steel (max)	12.7 mm
Drilling diameter in concrete (max)	19 mm
Power source	AC
Keyless chuck	No

Weight and Dimensions

Weight	2903 g
Package weight	5262 g