Makita HP2010N User Manual

2
SPECIFICATIONS
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
GENERAL SAFETY RULES
USA002-2
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
3.
Keep bystanders, children, and visitors
away while operating a power tool. Distrac-
tions can cause you to lose control.
Model HP2010N
Speed High Low
Capacities
Concrete 13 mm (1/2”) 20 mm (3/4”)
Steel 6.5 mm (1/4”) 13 mm (1/2”)
Wood 20 mm (3/4”) 40 mm (1-1/2”)
No load speed (RPM) 0 - 2,300/min. 0 - 900/min.
Blows per minute 0 - 46,000 0 - 18,000
Overall length 350 mm (13-3/4”)
Net weight 3.0 kg (6.6 lbs)

Makita HP2010N Specifications

General

Drilling	Yes
Chiseling	-
Chuck type	Key
Product color	Green
Number of gears	2
Impact rate	46000 bpm
Rated speed (max)	2300 RPM
Rated speed (min)	0 RPM
Drilling diameter in wood (max)	25.4 mm
Drilling diameter in steel (max)	12.7 mm
Drilling diameter in concrete (max)	19 mm
Power source	AC
Keyless chuck	No

Weight and Dimensions

Weight	2903 g
Package weight	5262 g