Makita HP2010N User Manual

5
4.
Keep hands away from rotating parts.
5.
Do not leave the tool running.
Operate the tool only when hand-held.
6.
Do not touch the bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
7.
Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow mate-
rial supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.

Makita HP2010N Specifications

General

Drilling	Yes
Chiseling	-
Chuck type	Key
Product color	Green
Number of gears	2
Impact rate	46000 bpm
Rated speed (max)	2300 RPM
Rated speed (min)	0 RPM
Drilling diameter in wood (max)	25.4 mm
Drilling diameter in steel (max)	12.7 mm
Drilling diameter in concrete (max)	19 mm
Power source	AC
Keyless chuck	No

Weight and Dimensions

Weight	2903 g
Package weight	5262 g