Makita HS6101 User Manual

11 ENGLISH
Replacing carbon brushes
►Fig.26: 1. Limit mark
Removeandcheckthecarbonbrushesregularly.
Replacewhentheyweardowntothelimitmark.Keep
thecarbonbrushescleanandfreetoslipintheholders.
Bothcarbonbrushesshouldbereplacedatthesame
time.Useonlyidenticalcarbonbrushes.
Useascrewdrivertoremovethebrushholdercaps.
Takeouttheworncarbonbrushes,insertthenewones
andsecurethebrushholdercaps.
►Fig.27: 1. Screwdriver 2. Brush holder cap
Afterreplacingbrushes,pluginthetoolandbreakin
brushesbyrunningtoolwithnoloadforabout10min-
utes. Then check the tool while running and electric
brakeoperationwhenreleasingtheswitchtrigger.If
theelectricbrakeisnotworkingcorrectly,havethetool
repairedbyaMakitaservicecenter.
TomaintainproductSAFETYandRELIABILITY,repairs,
anyothermaintenanceoradjustmentshouldbeper-
formedbyMakitaAuthorizedServiceCenters,always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mendedforusewithyourMakitatoolspecied
in this manual. The use of any other accessories
orattachmentsmightpresentariskofinjuryto
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Sawblades
• Ripfence(Guiderule)
• Guiderail
• Guiderailadaptor
• Hex wrench
• Joint
NOTE:
• Someitemsinthelistmaybeincludedinthe
tool package as standard accessories. They
may differ from country to country.

Makita HS6101 Specifications

General

Brand	Makita
Model	HS6101
Category	Saw
Language	English