Makita M432 User Manual

MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
The carbon brushes wear out after about
100 hours of operation.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment
including brush inspection and replacement should be performed by Makita Authorized
or Factory Service Centers, always using Makita replacement parts.
12

Makita M432 Specifications

General

Power source	Corded
Drilling capacity in steel	13 mm
Drilling capacity in masonry	13 mm
Chuck capacity	13 mm
Weight	1.7 kg
Voltage	18V

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Key safety guidelines for operating power tools, including work area, personal dress, and tool maintenance.

Voltage Warning

Precautions regarding power source voltage to prevent injury and damage.

ADDITIONAL SAFETY RULES

Specific Operational Safety

Rules for safe operation like avoiding nails, securing work, and handling hot parts.

HOW TO USE

Blade Mounting

Instructions for attaching standard and universal shank jig saw blades.

Roller Adjustment

Adjusting the roller for proper blade contact during cutting.

Operation and Plunge Cutting

Trigger control, speed adjustment, and performing plunge cuts.

Cutting Adjustments

Performing front flush cuts and bevel cuts using base adjustments.

Guides and Edge Finishing

Using rip fence and finishing edges for cleaner cuts.

Circular Cutting and Metal Work

Using circular guide and coolant for metal cutting.

MAINTENANCE

ACCESSORIES

MAKITA TWO YEAR LIMITED WARRANTY