Makita MLS100 User Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: MLS100
Blade diameter 255 mm (10")
Hole diameter 15.88mm (5/8")
Max. kerf thickness of the saw blade 3.2 mm (1/8″)
Max. miter angle Left 45°, Right 45°
Max. bevel angle Left 45°
No load speed (RPM) 4,200 /min
Dimensions (L x W x H) 610 mm x 485 mm x 515 mm
(24" x 19-3/32" x 20-1/4")
Net weight 13.8 kg (30.5 lbs)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Cutting capacities (H x W) with blade 255 mm in diameter
Bevel angle Miter angle
0° 45° (left and right)
0° 75 mm x 130 mm
(2-15/16″ x 5-1/8″)
75 mm x 90 mm
(2-15/16″ x 3-9/16″)
45° (left) 48 mm x 120 mm
(1-7/8″ x 4-3/4″)
48 mm x 90 mm
(1-7/8″ x 3-9/16″)
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
To avoid injury from ying debris, keep
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
Do not place hand or ngers close to the
blade.
Always set SUB-FENCE to left position
when performing left bevel cuts. Failure to
do so may cause serious injury to operator.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

Makita MLS100 Specifications

General

Input power	1500 W
Power source	AC
Blade diameter	255 mm
Idle speed (max)	4200 RPM

Weight and Dimensions

Weight	14700 g