Makita XCU06 User Manual

2
ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XCU05 XCU06
Overall length (without guide bar) 256 mm
(10-1/8″)
Rated voltage D.C. 18 V
Net weight 2.8 - 3.3 kg
(6.2 - 7.2 lbs)
Standard guide bar length 200 mm
(8″)
250 mm
(10″)
Recommended guide
bar length
with 90PX 200 - 250 mm
(8″ - 10")
Applicable saw chain type
(refer to the table below)
90PX
Standard sprocket Number of teeth 6
Pitch 3/8″
Chain speed 0 - 24 m/s
(0 - 1,440 m/min)
(0 - 4,720 ft/min)
Chain oil tank volume 140 cm
3
(4.7  oz)
• Due to our continuing program of research and development, the specications herein are sub-
ject to change without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
•
Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges
may cause injury and/or re.
Saw chain, guide bar, and sprocket combination
Saw chain type 90PX
Number of drive links 33 40
Guide bar Guide bar length 200 mm
(8″)
250 mm
(10″)
Cutting length 180 mm
(7-1/8″)
244 mm
(9-5/8″)
Part No. 161848-6 161846-0
Pitch 3/8″
Gauge 1.1 mm
(0.043″)
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″

Makita XCU06 Specifications

General

Brand	Makita
Model	XCU06
Category	Chainsaw
Language	English