8
PARTS DESCRIPTION
2
1
3
4
5
► 1. Tank cover 2. HEPA lter 3. Damper 4. Prelter
5. Tank
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION: Always wear dust mask during
assembly or maintenance.
Connecting the hose
NOTICE: Never force the hose for bending or
stamp it. Never move the cleaner by a hose.
Forcing, stamping and pulling the hose may cause a
breakage or deformation of the hose.
NOTICE: Do not pick up large wastes such as
planer carvings and concrete pieces. It may cause
a hose stufng and damage.
For vacuum cleaning
Insert the hose into the suction inlet and turn it clock-
wise until it clicks.
1
► 1. Suction inlet
For blowing
Insert the hose to blower outlet and turn it clockwise
until it clicks.
1
► 1. Blower outlet
NOTE: This cleaner has the suction inlet and blower
outlet separately. Connect the hose to the proper port
depending on your work.
To Next Page
Loading...
Need help?
General
