Commissioning and operation
18
Starting
Danger:
Before starting make sure that no-one is in the engine’s danger area.
Caution:
When starting do not use any additional starting aids (e.g. injection with starting pilot).
D Ensure that no load is on the engine before starting it, eg switch off load, disengage
clutch, put gearbox into neutral etc.
D Insert starter key in starting lock
D Press starter button until engine starts
Caution:
D When engine starts, release starter button immediately
D lf engine does not start, actuate starter for about 10 seconds, wait for 30 seconds
and then attempt to start engine again and so on
With engine with automatic starting it is indispensable that none of the moving parts be
accessible. Warning signs “Unit starts automatically” are to be attache to the engine. Re-
gulation on this which may apply locally are to be satisfied.
When engine is running, lube oil pressure must build up at the oil pressure gauge. If not
switch off engine immediately.
Avoid running the cold engine for any length of time since in any internal combustion en-
gine this is liable to cause increased wear due to corrosion. Prolonged idling is harmful to
the environment.
To Next Page
Loading...
Need help?
General
