Transport, Packaging and Storage
41
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
5.5 Packaging
Packaging
The individual packages are packed in accordance with the expected conditions of transport.
The purpose of the packaging is to protect the components from transport damage, corrosion and other
damage. For this reason do not unpack components until shortly before they are to be assembled.
Handling Packing Material
Dispose of packing material according to the valid local and statutory regulations.
IMPORTANT!
Risk of hazard to the environment caused by incorrect disposal!
Packaging materials are valuable raw materials and can in many cases continue to be used
or can be processed and recycled. Incorrect disposal of packaging materials may cause an
environmental hazard.
For this reason:
S Dispose of packing materials in an environmentally friendly manner.
S Observe the valid local regulations. If necessary, contact a professional disposal com
pany.
5.6 Storage
Storage of packages
Store packages under the following conditions:
S Do not store in the open.
S Store in a dry and dust-free environment.
S Do not expose to damaging chemicals.
S Protect from sun light.
S Avoid any physical shocks.
S Storage temperature: 15 to 35 °C.
S Relative humidity: max. 60 %.
S If stored for more than 3 months, regularly check the condition of the packaging. If necessary, renew or
replace the preservation.
NOTE!
Some of the packages may have information printed on them regarding their proper sto
rage. Please observe this information.
To Next Page
Loading...
Need help?
General
